Controller included
AVAILABLE IN TWO SIZE TWO COLORS
UNPRECEDENTED MODULARITY
- slide-in/ interlocking mechanism
- PIN-to-PIN contact point for receiving power and signal
- reduced need for mounting screws
DESIGNATED CABLE MODULES FOR UNI FAN
Each UNI FAN features a cable module with a PIN-to-PIN contact point to receive power and signal. Each cable module can support up to 4 UNI FAN, allowing users to choose to use either a single fan or up to 4 fans in one go.
Note!
When using the UNI FAN SL120 in a custom water cooling configuration, make sure that the fittings on the radiators do not interfere with the contact point on the side of the fans. We suggest to use the insulating tape to isolate contact points.
SOPHISTICATED RGB LIGHTING
The 32 addressable RGB LEDs embedded in each fan (16 LEDs on either side of the frame) ensure vibrant lighting effects.
VIBRANT RGB LIGHTING VISIBLE FROM ALL ANGLES
The 16 LEDs on each side shine through a diffuser, ensuring a smooth light is visible from all angles.
L-CONNECT SOFTWARE FOR
A MORE INTUITIVE FAN CONTROL
With the toggle of a switch, changing control between motherboard software and the L-Connect is a breeze.
Run L-Connect as administrator
We recommend updating the latest version and update the firmware of the controller to enhance your overall experience.
install L- Connect 1 or 2 Guidebook
When L-Connect can’t control the fan speed and lighting effects, please download the fix.
- Unplug the USB and SATA Cable of the UNI HUB
- Close and exit MSI dragon center and L-connect software.
- Download L-Connect Fix , and run UP_MousePad.bat
- To check if it is downloaded correctly, please direct to your download file see details and check if the file version is 1.0.3.0
- Plug back the USB and SATA cables and reboot the system.
Note : Please do not download any software regarding L-Connect update apart from LIAN LI website. This might occur UNI HUB(Controller) disfunction.
Note: Please update firmware in L-Connect 3
SL120 Fan Speed : 800 ~ 1900 RPM
SL140 Fan Speed : 500 ~ 1500 RPM
MORE DURABLE, EXTREMELY SILENT
A close look at what makes UNI FAN operate efficiently.
PREMIUM LOOK, EXQUISITE DETAILING
Machine-detailed aluminium frame
Aluminium logo badge
CD texture for an enhanced quality feel
A DESIGNATED UNI FAN CONTROLLER (UNI HUB)
TO EASILY MANAGE 16 FANS IN ONE GO
If the motherboard used in your build doesn’t have the requisite 3-PIN 5V ARGB headers, you can leave this port unplugged.
But then you won’t be able to switch to motherboard synchronisation with the toggle shown on the L-Connect.
OPTIONAL KIT – ARGB DEVICE CABLE KITS
Supports all Lian Li product control by UNI HUB or connect UNI FAN directly to motherboard.
UPDATED SCREW HOLES OF UNI FAN SL SERIES
In order to minimize the tolerance interference with the radiator and case screw hole.
*** The update will implement on the batch manufactured in June 2021.
*** The new oblong hole UNI FAN SL Fans can still be compatible with the prior ones
NOTE
Rule 2// The screw holes between the two fans must be 15mm width on the radiator for either 120mm or 140mm UNI FAN. |
UNI FAN SL120 FAQs
2. I can’t control my UNI FAN with L-connect
3. UNIFAN went back default mode after restart
4. Which fan header shall I connect to?
5. UNI FAN does not sync to the PWM signal
USER MANUAL DOWNLOAD
SPECIFICATIONS
| MODEL | UNI FAN SL120 | UNI FAN SL140 |
|---|---|---|
| FAN DIMENSION | 120 X 120 X 25 ( mm ) | 140 X 140 X25 ( mm ) |
| RATED VOLTAGE | DC 12V(FAN) & 5V(LED) | DC 12V(FAN) & 5V(LED) |
| FAN SPEED | 800~1900RPM | 500~1500RPM |
| MAX. AIR PRESSURE | 2.54mmH2O | 1.67mmH2O |
| MAX. AIR FLOW | 58.54CFM | 70.5 CFM |
| ACOUSTICAL NOISE (MIN-MAX.) | 31dB(A) Max | 30dB(A) Max |
| LOCKED CURRENT | >= 50mA | >= 10mA |
| BEARING TYPE | Fluid Dynamic Bearing(FDB) | Fluid Dynamic Bearing(FDB) |
| START-UP VOLTAGE | DC 6.0V | DC 6.0V |
| INPUT CURRENT | 180mA(FAN) /600mA (LED) | 100mA(FAN) / 340mA (LED) |
| INPUT POWER | 5.16Watt | 3.6W |
| WARRANTY | 2 year | 2 year |
